MEMS Digital Inclinometer System with Android
Instruction Manual
ICM0099A
20
4.3.6 V
IEW
B
OREHOLE
L
IST
The View Borehole List is displayed when the user selects a particular site from the View
Site List screen. The View Borehole List displays a listing of the available boreholes sorted
based on the borehole creation date. Each borehole shows the borehole name, and the
depth of the borehole.
Tap on a desired borehole to view the borehole readings associated with the selected
borehole.
The user may also tap the M
ore icon to call the contact person’s phone number or edit the
site information.
The user may also tap the + NEW BOREHOLE button to create a new borehole. A borehole
is created by entering the following information:
•
Borehole Name (Mandatory)
– Name of the borehole
•
Depth
– Depth of the borehole’s lowest reading. The depth will always be in
increments of 0.5 meters or 2.0 ft.
•
Top Depth
– Depth of the borehole’s top reading. This is normally set to 0.5 meters
or 2.0 ft.
•
Unit
– Measurement is taken in meters or feet based and must match the probe’s
units.
•
Export Format
– The collected reading file may be supported in two industry formats.
The two formats are:
▪
Digital Inclinometer (*.csv) format: this type of file can be imported into
Inclinalysis™ and Microsoft Excel.
▪
RPP Format (*.rpp): t
his type of file can be imported into Inclinalysis™,
DigiPro and Slope Indicator’s software including DMM for Windows. GTilt
and GTilt Plus software also has the ability to import *.rpp file formats.
A sample borehole list is shown in Figure 15.
Figure 15
– Sample borehole list
