RSscan footscan, User Manual

Page: 24 / 179

1.10 Minimum System Requirements
Footscan 9 runs on the following versions of Microsoft Windows : 7, 8 and 10. rs scan
tests and validates its software on 32-bit and 64-bit PC systems.
The minimum system requirements are:
Microsoft Windows 7.
An intel i3 Haswell series processor, or similar/newer, processor.
1GB of free HDD hard disk space.
512MB of RAM for general use of footscan 9 and 2GB of RAM for performing
balance measurements.
An integrated graphics card supporting at least OpenGL 2.1.
Support for a minimum screen resolution of 1024x768.
One USB2 port available to connect the footscan plate.
rs scan recommends the following system requirements for maximum user experience:
An intel i5 or i7 Broadwell series, or similar/newer, processor.
5GB of free SSD hard disk space.
4GB of RAM.
A dedicated graphics card supporting at least OpenGL 2.1.
Full HD support corresponding to a screen resolution of 1920x1080.
Up to four USB2 ports available to connect the footscan plates, boxes, scanners
and dongles.
An active internet connection.
When the graphics card doesn't support at least OpenGL 2.1, 3D visualization of
pressure data is disabled. When in doubt review the specifications of your graphics card
or contact our support department at
support@rsscan.com .
It is not guaranteed that the footscan 9 software runs correctly from within a
virtual machine. Running from a virtual machine might cause connection
problems with the plate or prevent the software from functioning correctly
itself. It is advisable to run the footscan 9 software directly on the native
operating system.
It is not guaranteed that the footscan 9 software runs correctly on mobile
devices (for example tablets). Running on mobile devices might cause
connection problems with the plate or prevent the software from functioning
correctly itself. It is advisable to run the footscan 9 software on non-mobile
devices.
® ®
®
®
®
®
®
®
®
®
®
®
®
RS-PRD-00562-016 24