RSscan footscan, User Manual

Page: 139 / 179

12.8 Forefoot Corrections
The forefoot corrections panel (Figure 77 ) allows including additional forefoot
corrections.
Shape controls the shape of the forefoot correction. For this
feature, a differentiation is made between regular insoles
(i.e. comfort, narrow, running and soccer) and cycling
insoles.
Regular insoles are standard 2/3rd printed insoles and the
forefoot correction is printed additionally for a specific zone.
Regular insoles have three options available, more
specifically Meta 1, Meta 1+2 and Meta 5.
For cycling insoles, the complete forefoot is printed and the
forefoot corrections is available in the form of a wedge in the
forefoot. This wedge can be orientated medially or laterally.
Height controls the height of the chosen forefoot correction. For
regular insoles, the height varies from 2 to 4 mm in steps of
1 mm. For cycling insoles, the wedge varies from 1 to 4 mm
in steps of 1 mm.
Stiffness controls the stiffness of the forefoot correction (Flexible or
Stiff). This option is only available for regular insoles.
Figure 77: Forefoot Corrections.
RS-PRD-00562-016 139