RSR TB220L User Manual Download Page 4

- 3 -

any servicing other than that contained in 

the operating instructions unless you are 

qualified to do so.

-  Avoid foreign bodies and liquids entering the 

device.

-  Do not place open e.g. lit candles, on or 

directly adjacent to the device.

-  Do not use any corrosive or abrasive cleaning 

agents. These could damage the surface of 

the device.

-  Please refer the information on exterior 

bottom or rear enclosure for electrical 

and safety information before installing or 

operating the apparatus.

-  Minimum distance around the apparatus for 

sufficient ventilation is 5cm;

-  The ventilation should not be impeded by 

covering the ventilation openings with items 

such as newspaper, table-cloths, curtains etc.

-  No naked flame sources such as lighted 

candles should be placed on the apparatus;

-  Batteries should be recycled or disposed of as 

per state and local guidelines;

-  The use of apparatus in moderate climates.

•  The marking label is pasted on the bottom or 

back of the equipment.

WARNING

 

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

 

If you think batteries might have been 

swallowed or placed inside any part of the body, 

seek immediate medical attention. Keep new 

and used batteries away from children. If the 

battery compartment does not close securely, 

stop using the product and keep it away from 

children. The remote control supplied with this 

product contains a coin/button cell battery. If 

the coin/button cell battery is swallowed, it can 

cause severe internal burns in just 2 hours and 

lead to death.

Correct Disposal of this product. This 

marking indicates that this product 

should not be disposed with other  

household wastes throughout the EU.    

To prevent possible harm to the environment 

or human health from uncontrolled waste 

disposal, recycle it responsibly to promote 

the sustainable reuse of material resources. 

To return your used device, please use the 

return and collection systems or contact the 

retailer where the product was purchased. 

They can take this product for environmental 

safe recycling.

The Bluetooth® word mark and logos are 

registered trademarks owned by Bluetooth SIG, 

Inc. We are the licensee to use such marks. Other 

trademarks and trade names are those of their 

respective owners.

FCC INFORMATION (for US customers)
Warning:

Changes or modifications to this unit not 

expressly approved by the party responsible for 

compliance could void the user’s authority to 

operate the equipment.”

NOTE:
• 

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in 

a residential installation. This equipment 

generates, uses and can radiate radio 

frequency energy and, if not installed and 

used in accordance with the instructions, 

may cause harmful interference to radio 

communications.

•  However, there is no guarantee that interference 

will not occur in a particular installation.  

If this equipment does cause harmful 

interference to radio or television reception, 

which can be determined by turning the 

equipment off and on, the user is encouraged 

to try to correct the interference by one or 

more of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the 

equipment and receiver.

-  Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

-  Consult the dealer or an experienced radio / 

TV technician for help.

•  This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following 

two conditions:  

(1)  this device may not cause harmful 

interference, and 

(2)  this device must accept any interference 

received, including interference that may cause 

undesired operation.

•  Shielded cables must be used with this unit to 

ensure compliance with the Class B FCC limits.

 

FCC ID: Z8M-TB220L

Summary of Contents for TB220L












Reviews: