USER S GUI DE/BASIC SET
’
1
、
Insert adapter DC plug into DC input jack (8), insert the other AC plug into AC power supply
outlet (According to the sign on the back side).
2
、
Sound Signal Output Jack: Insert one end of the cable connector plug into the signal output
jack (9) at the back of the receiver and the other end of the plug into KTV or amplifier
MIC-IN jack.
3
、
Push on receiver's power switch (1), if power LED indicator lights, this indicates that receiver
works normally.
4
、
Extend antenna(s) of the receiver fully. Incline the antenna(s) outwards to 45 degree to reach
the best receiving effect.
5
、
Insert attached 9 V battery into wireless microphone's battery compartment, and then close the
cover.
6
、
Turn on microphone power switch (2), power LED indicator (3) will light, low battery LED
indicator (4) will flash once then off , this indicates that microphone is ready to use.
7
、
At this time one of the receiver's RF LED indicator (4) or (5) will light. Adjust volume control
(2) or (3) to make receiver's volume to be in normal working state. Finish test of wireless
microphone.
8
、
The cartridge suit of hand-held microphone, with patented detachable design, can be easily
replaced by our other professional cartridge suits. Our company has specially designed
cartridge suits for replacement.
1
、
Receiver x 1
2
、
Handheld MIC x 2
3
、
AC Adapter x 1
4
、
1/4
″
Jack Connector Cable x 1
5
、
9V Battery x 2
6
、
User’s Manual x1
4
