Specifications
RSL CG3
Woofer: 4” with Ferrite Magnet, Kevlar Cone
Tweeter: 1” Silk Dome, Ferrite Magnet
Frequency Response: 100-20,000 Hz ± 3db
Recommended Impedance setting for amplifiers: 6 or 8 ohms (whichever is higher)
Sensitivity: 86 db SPL @ 1 watt, 1 meter distance
Recommended Power: 25-125 watts
(Please note the following: this rating is for use above 100 HZ. Amplifiers up to
150 watts can be used if care is taken not to operate them at maximum volume)
Crossover Frequency: 2,500 Hz
Crossover Slope: 12 db/octave
Crossover Parts: Air core coil, Polypropylene capacitors, Gold Plated binding posts
Tuning Method: Compression Guide
tm
System Resonance: 87 Hz
Threaded Insert Bolt Size: 1/4 x 20, maximum length 3/8 inch.
Weight: 6 lbs.
Dimensions: H: 9 1/2” W: 5 1/16” D: 6 3/8 “(Without grille 6”)
RSL CG23
Woofers: Dual 4” with Ferrite Magnet, Kevlar Cone
Tweeter: 1” Silk Dome, Ferrite Magnet
Frequency Response: 85-20,000 Hz ± 3db
Recommended Impedance setting for amplifiers: 6 or 8 ohms (whichever is higher)
Sensitivity: 88 db SPL @ 1 watt, 1 meter distance
Recommended Power: 25-125 watts
(Please note the following: this rating is for use above 100 HZ. Amplifiers up to
150 watts can be used if care is taken not to operate them at maximum volume)
Crossover Frequency: 2,500 Hz
Crossover Slope: 12 db/octave
Crossover Parts: Air core coil, Polypropylene capacitor, Gold Plated binding posts
Tuning Method: Compression Guide
tm
System Resonance: 75 Hz
Threaded Insert Bolt Size: 3/8 x 16, maximum length 3/8 inch.
Weight: 10 lbs.
Dimensions: H: 6” W: 16” D: 6 3/8 “(Without grille 6 ”)
23