Borg & Overstrom
Leak Detection
NOTE: This machine is equipped with a leakage detection device. When leaking is
detected, the dispense operation will be cut off automatically. This is indicated by a
blue LED flashing at the base of the tap.
To reset:
Unplug the machine and remove
the protective cover.
Locate the Leak Detector
valve.
Install & Operation Manual
Locate the source of leakage
and rectify.
Reset the red lever (push it in).
12
Locate the detection probe which
can be found in the bottom at
the rear of the machine. Dry the
probes and internal area with a
dry cloth.
-�
Reconnect the power to machine
and test operation.
GB
