9
RSI Systems Furniture
X3 Connection Post
STEP 3:
Make sure the bottom top cap line on the
X3 Post lines up with the top of the side rail then fin
-
ish tightening the screw.
STEP 2:
Feed your X3 Ponel Screw
(M8x30mm)
through the
CON-B
bracket and into the post.
NOTE:
If you have
CON-A
mounted inside the panel you will
need to swap them out with the extra
CON-B
brackets that
are included in your hardware pack.
STEP 1:
Fit the
X3 Post Centering Pieces
into the
X3 Panel Rail.
