FO-OPLK_2018-06
3. Lift the Keystone Louver (~ 25 lbs) and place it on top of the existing faceplate. Align the three tabs
on the bottom of the Keystone Louver with the slots in the top of the faceplate. If necessary, the
faceplate on the fireplace can be loosened by slightly loosening the bolt that was hidden behind the
keystone.
4. Insert the two black bolts through the holes at the top of the Keystone Louver to fasten it in place
using a
5
/
32
" Allen key. Check to make sure that the top back bend of the louver rests against the
fireplace facing over its entire width. Tighten the screws if necessary.
5. Use a
7
/
16
" wrench and screw the nut most of the way on the large keystone. Insert the keystone nut
into the decorative facing hole and pull it down in place. Tighten the nut on the back side of the
faceplate using the wrench.
