Congratulations on your purchase of a Studiomaster AX Series power amplifier. Like
all Studiomaster products, it has been designed to meet the highest standards of
performance, safety and reliability. We are confident that this amplifier will fully meet
your needs for many years to come. Please read this guide carefully and keep it safe
in case you need to refer to it in the future.
Unpacking
Remove your AX amplifier from its packing. Check that the carton includes an
AC power cord/mains lead and a warranty card. It is important to retain the carton
and all packing material in the event that the unit needs to be returned to your dealer
for service or repair. Please complete and return your warranty card. Returning the
completed warranty card does not diminish your statutory rights in any way.
Safety instructions
1.
Make sure you have the correct product for your local supply Voltage. This will be marked on
the rear panel of the amplifier.
2.
Only use the A.C. power cord/mains lead supplied with the product. If it becomes damaged in
any way it should be replaced.
3.
Never operate without, or remove, the safety ground (earth) from the A.C. power cord/mains
lead.
4.
Do not attempt to remove screws or panels. There are no user serviceable parts inside.
5.
Do not operate the unit next to heat sources such as electric fires, central heating etc.
Note : Exposure to strong sunlight (eg outdoors) could cause the amplifier to over heat.
6.
The unit should not be operated or stored near rain or moisture.
7.
This equipment must not be exposed to dripping or splashing and no objects filled with liquids
should be placed on top of it.
8.
Always ensure that both front and rear ventilation holes are clear of obstructions.
9.
Write the serial number in the box provided below for future reference.
10.
If the unit gets damaged or appears to have developed a fault refer to the Service Information
section for details.
WARNING: THIS APPARATUS MUST BE EARTHED (GROUNDED)
STUDIOMASTER AX Amplifier Series
STUDIOMASTER AX Amplifier Series
1