RS PART No.:696-1210
OWNER’S MANUAL
How to use 1 Channel Mobile DVR
SSD01CA
Iv OPERATION
4-1 FRONT PANEL
1. LED
It shows status of each operations.
PWR
LED : This LED shows status of DVR is power ON/OFF..
RUN
LED : This LED is flash when DVR is operating (Play or
Record)
2. Buttons
Front Panel has 8 buttons which have multi functions applied by
modes. Must be careful how to use all buttons by different situations.
It will explain special key with any actions.
1) REC
Press REC button to start recording. While recording, R icon
appears on top of the screen.
If want to stop recording, press REC button again.
2)
PLAY / PAUSE
(
▶
||)
Press PLAY/PAUSE
(
▶
||) button to start playback. Below screen
menu appears for searching
Replaying from the first : Playback the recorded image from the first
of data.
Replaying from the time search : Select the time for searching.
Note : Select the time within time rage from Start time to End time.
Otherwise, “Out of rage” message appears then playback from the
first.
: Fast forward button (x2, x4, x8, x16)
: Play image picture by picture
: Play / Pause
: Rewind image picture by picture
: Fast rewarding (x2, x4, x8, x16)
3) MENU (LOCK)
Press Menu button to start system setup. Then below screen
appears.
Using the
◄
,
►
▲
,
▼
button, move the cursor
and select the setup.
Note : In order to enter
into setup menu, record
must be stopped.
To protect DVR, press
MENU button for 3 sec
and more then system is
locked.
When system is locked, all of buttons and remote controller doesn’t
work. Press MENU button for 3 sec again, DVR is unlocked.