RS RS-1365, Instruction Manual

Page: 6 / 19

FRONT PANEL DESCRIPTION / EN
EN-4 10/15/10 Version No. 00
(5) H Hold button: Press the H button to freeze or unfreeze
the display readings. In H mode, press the %RH / TEMP,
°C / °F, DEW or WET button to select the desired readings.
(6) %RH/TEMP button: Press the %RH/TEMP button to display
the reading of %RH and °C / °F on the main display and
secondary display alternately.
(7) Set button:
Enter the MX/MN mode and press the SET button to
cycle through the elapsed time and the real time of
Maximum or Minimum as displayed on the LCD.
Press SET button for 2 seconds to enter the auto-timer
datalogging setting mode, the LCD will display " " mark.
The "SET" button is inoperative when the auto-timer
datalogging function is enabled (
is shown
on the
LCD display). Press the "
↵ ↵↵ ↵
" enter button to exit from
the auto-timer datalogging function. The SET button will
then operate normally during the next set-up procedure.
(8) °C / °F button: Press the °C/°F button to temperature units
between Celsius (°C) and Fahrenheit (°F).
(9) MEM button: Manual data memory control key.
(10)
↵
↵↵
↵
ENTER button:
In READ mode, press the
↵
↵↵
↵
enter button to exit READ mode.
In the auto-timer datalogging setting mode, press the
↵ ↵↵ ↵
enter button to store the setting time.
In the auto-timer datalogging setting mode, press the
↵
↵↵
↵
enter key to exit this mode.