12
7. Tighten the forestay and secure as
shown
3.5 Rigging the Trapeze
Note: The LDC 2000 Trapeze pack is not standard fitment and its use
whilst racing is currently not sanctioned by the 2000 class association.
1.
Fit the trapeze T terminal into the highest position on the mast above the
shrouds.
2.
Make sure the wires hang on the cockpit side of the spreaders.
3.
Remove the Spinnaker ratchets and their shackle from the shroud U bolt.
REMEMBER
If the wind is blowing, there will be a lot of
pressure at the top of the mast making it wave
around. Consider finding additional people to
help you if you feel you will struggle!
REMEMBER
Check that both ends of the main halyard, jib
halyard, and gennaker halyard are tied off at
the bottom end of the mast so that they are
within easy reach when the mast is stepped.
The lowers must be fitted before the trapeze is used.
Summary of Contents for LDC 2000
Page 1: ...1 LDC 2000 Rigging Guide...
