RS DPA20E, Instruction Manual

Page: 8 / 30

Dehumidifer 20L/D
4/2/2016 Version No. 001 8
Operation :
1. Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of the unit for correct
voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work.
3. Press humidity setting button to set the working model you need: continuous working, humidity 40%,
50%, 60% or 70%. The relative indicator will light on.
4. Press speed/ventilation button to set the ventilation speed, high or low. The relative indicator will
light on.
5. Press the TIMER button to set the operating hour you need (1~24 hours). The display window will show
the hour(s) you set as you press the TIMER button, after releasing it for 8 seconds around, the display
window will return to the room humidity.
As the set time has been reached, the compressor will stop
working automatically.
6. By pressing the ´7(03´ button, the display window will show the room temperature, after releasing the
button for 8 seconds around, the display window will return to the room humidity.
7. DRYER function is turbo ventilation to dry the moisture in the air continuously, so it could help to dry
the laundry.
8. If you don ¶ t want to dry the air, just want to circulate the air or remove the odor inside the room, please
press AIR CLEAN button.
9. To turn off the unit, press ON/OFF button again.
10. Pre-setting function By pressing TIMER button but without turning on the other functions (including
ON/OFF button), you can PRE-SET the time for the machine to work. For example, if you press the timer
to '2', the unit will work automatically after 2 hours.
Transferring Schuko VDE version plug to BS plug: