Figure 3
Figure 4
Connection of Interface Cards
Please follow the simple instruction below to install interface card(s):
1.
Power off expansion box.
2.
Unscrew the seven screws that fix the front cover.
3.
Remove the front cover.
4.
Insert the add-on interface card(s) to proper slot(s).
5.
Fix the interface card(s).
6.
Fix the bracket to the card stand by screw.
7.
Replace front cover and the screws.
Auxiliary
Power Outlet
Power Inlet
(90-265V a.c.)
To wall outlet
The backside of the
Notebook PC
100-PIN Cable
The 100-PIN Connector is an AT
expansion bus for connection to the
expansion box
