background image

 

RS-PRD-00615-001  

                                                                                                      Page 18 

10. Appendices 

10.1. 

Troubleshooting 

 

The power switch light does not light up 

 

 

Check if the power switch is in the ‘on’ position (marked I). 

 

  Check if the power cord is plugged in to the AC outlet. 

 

  Check the fuse. 

 

 

The PC does not recognize the scanner 

 

  Check if the USB cable is plugged in at the scanner and the PC. 

 

  Reinstall the software. 

 

 

10.2.  REACH compliance statement  

The  European  Union  chemical  regulation  2006/1907/EEC:  REACH  (Registration, 
Evaluation, Authorization and Restriction of Chemicals), entered into force on 1

st

 June 

2007. 
 
As a manufacturer of articles (products), according to article 33, RSscan International 
NV is obligated to provide the recipient or consumer of its products, containing any of 
the  Substances  of  Very  High  Concern  (SVHC)  of  the  published  candidate  list  in  a 
concentration  above  0.1%  w/w,  with  sufficient  information  to  allow  safe  use  of  the 
product including, as a minimum, the name of that substance. 
 
All information in this statement is based on our current knowledge. We take neither 
liability nor warranty for factors beyond our knowledge and control. 
 
The majority of products supplied by RSscan International NV do not contain any of 
the  Substances  of  Very  High  Concern  (SVHC)  of  the  published  candidate  list  in  a 
concentration above 0.1% w/w. The articles listed below may contain a Substance of 
Very High Concern (SVHC) of the published candidate list in a concentration above 
this threshold. 
 

 

Article 

Substance 

CAS number 

Application 

Power cables, USB cables. 

Bis (2-ethyl(hexyl)phthalate) (DEHP) 

117-81-7 

Plasticizer in PVC cables. 

 
 

 

 

Summary of Contents for iQube E500



















Reviews: