RS PRO RSHS800 Series, Quick Start Manual

Page: 30 / 208

Scope Recorder
Press Recorder → Scope Recorder to enter the interface shown
below:
Under the menu of Option , you could set the Viewer, Record and
Replay shown below.
Press Record → Start to enter the waveforms record interface
shown below, the total recording time is 4 minutes and 11 seconds.
Recorded waveforms can be saved in “Memory” or “USB Key”
under the Save Mode menu.
Submenu Option Instruction
Viewer
Split
Waveforms of channel1 displays on half of
screen, channel2 displays on another half.
Full Screen Waveforms displayed in full screen.
Record
Continuous
Record data continuously, the existing
data will be over writen by new data if
storage is full.
Single Recording stops if the storage is full.
Replay
By point When being replayed, the waveforms
are updated by points.
By frame
When being replayed, the waveforms
are updated by a full screen of data.
30