OPERATION INSTRUCTIONS / EN
EN-12
10/15/10 Version No. 00
When the memory is full (4100 data sets), the "FULL"
symbol will appear on the display and the meter will stop
datalogging.
In the continuous data-logging mode, the MAX, MIN and
AVG function can be used.
Press the "MEM" again to stop logging. The continuously
logged data can only be read after it is downloaded to a
PC. It cannot be read using the "READ" function to show
the data the on display.
4-6 How to disable auto power-off function
The meter will automatically turn off if no key press occurs
for 30 minutes.
Press "
" key to turn off the meter.
Press and hold down the "
↵
" key then press "
" key to
turn on the meter and the auto power-off function will be
disabled.
The time display auto power-off mark "
:
" will not be
visible.
Auto power off mode is enabled each time you turn on
the meter. It is automatically disabled in "
MX/MN
" and
continuous data logging modes.
