RS PRO DS 2, Instruction Manual, Page: 13 / 36

12
1. Plug the unit into a correct mains socket. (Please refer to the rating
label at the rear of the unit.)
2. Press button POWER to turn on the unit. The unit will start to work in
continuous mode.
3. Press button HUMIDITY to set the room humidity you need: continuous
de-humidifying , 40%, 50%, 60% or 70%
4. Press button MODE to choose the ventilation speed, MUTE, TURBO or
DRYER.
5. Press button TIMER to set the working hour you need (1~24 hours).
6. To turn off the unit, press button POWER again.
IMPORTANT!
1. After switching off the unit, it takes at least 2 minutes to OFF the
unit completely, this allows the heater to cool down. During the
cool-down, the power indicator will blink for warning. DO NOT
DISCONNECT THE PLUG DIRECTLY FOR QUICK-OFF.
2. Do not operate the unit without the AIR FILTER.
3. For safety purpose, the heater will break for 2 minutes after running
for 8 hours continuously, then re-start, whatever the set time has
been reached or not.
During the break, the fan keeps working for heat-dissipating.
To turn off the unit, press the “POWER” button (the set time will
be cleared).
When the water tank is full, the set time will be cleared, too.
If the time was not set, the machine will shut off automatically after
24 hours.
Operation