Multi Media Cable Tester /
English
EN-10
2020-10-12/ V001
Press to set and exit the setting mode.
Using Multiple Remote ID Locators
The multiple remote ID locators (1 ~ 8) helps you to identify
multiple network cable connections, as shown in Figure.
The display in Figure shows that the verifier is connected to
the cable terminated with remote ID locator number 3.
Battery Replacement:
The meter is powered by 9V battery x 1pc.
Use the following procedure to replace the battery:
1.
Replace battery immediately when the LCD
displays .
2.
Turn the meter off and remove the battery cover.
3.
Replace with the new battery; take care to note the
correct polarity.
4.
Re-install the battery cover.
