RS PRO 187-5321, User Manual, Page: 18 / 40

18
rspro.com
Should you prefer to use the appliance without having to empty the tank every so often,
proceed as follows:
• Remove the drain knob and rubber plug and retain for future use.
• Connect the drain tube supplied to the
water outlet as shown and locate the
other end into a drain.
• The drain tube may be extended by
adding an extension tube and using a
suitable connector.
Please note
1. The drain must be at a lower level than the drain hole on the unit.
2. Flashing ‘Water Full’ indicator will not function in this mode of drainage.
3. If you want to extend the water tube, you can connect it with another tube (OD: 18mm).
*The extended tube is NOT supplied along with the unit.
Originally
supplied drain
Extended drain tube
(outer diameter:
18mm)
Originally
supplied drain
tube