RS Fiber Video Service Remote and Codes
18
The Titan universal remote control comes pre-programmed to operate the set-top box that is supplied by your service provider. In addition, Titan can
be programmed to control four (4) additional home theater equipment devices.
There are two ways you can Program your Remote:
• Program your remote using the Brand Search Method.
• Program your remote using the Auto Search Method.
Brand Search Method
1. Turn on all of the devices that you wish to control.
2. On the remote control, press the mode key that you wish to program once (
AUX
,
DVD
,
AUD
, or
TV
, ); it blinks once.
3. Press and hold
SETUP
until the mode LED blinks twice.
4. Use the 5-digit manufacturer codes supplied following these instructions to locate device type and brand name for the device you wish to control.
Enter the first 5-digit code for your device. If performed correctly, the mode LED blinks twice.
- If the selected mode LED emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try entering the same code again.
5. Aim the remote control at the device and press
POWER
once. The device should turn off. If it does not, repeat steps 2 through 3, trying each
code for your brand until you find one that works. If it still does not respond, try the “Auto Search Method.”
- If the device does not have a
POWER
key, press the Play key. Repeat steps 2 through 5 for another mode and/or key or press and hold
SETUP
to exit
programming.
TV set-up code Number
Device type: _____________________
AUD set-up code Number
Device type: _____________________
DVD set-up code Number
Device type: _____________________
AUX set-up code Number
Device type: _____________________
Auto Search Method
If your home entertainment device does not respond to the Titan Remote Control after trying all of the codes listed for your brand, or if your brand is
not listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press
TV
once; it blinks once. Then press and hold
SETUP
until the TV key blinks twice.
3. Enter
9 9 1
. The
TV
key blinks twice.
4. Enter one of the following four digits:
a. Set-top boxes (cable, satellite, etc.) -
0
b. TV -
1
c. DVD/VCR/DVR -
2
d. Audio Devices -
3
5. Aim the remote control at the TV and press
POWER
once.
6. Press and release the
CH+
key continuously, then stop when the TV turns off.
- In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first.
7. Press
POWER
. The TV should turn on, then press
SETUP
to lock in the code.
- If the TV does not turn on during step 6, then slowly press and release
CH-
to go back through the codes. Press
SETUP
when the TV turns on.
8. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g.,
AUX
,
DVD
,
AUD
, or
STB
) for
the device you are searching for.
