04
2. INSTALLATION AND OPERATION
1. Unpacking and Inspection
2. Installation
Examine the packing carton for damage. Notify the carrier
immediately if any damage occurs.
Connect the power cord to a verified grounded 3-wire
receptacle.
Connect the power cord of your electronic equipment to the
outlets of the AVR. Switch on the equipment.
Switch on the AVR by pressing the main switch. The LED will
light on. The AVR is now considered to be working properly.
3. Panel Explanation
3. TROUBLESHOOTING
The Troubleshooting chart covers most of the difficulties that you may encounter under normal working condition. Should the AVR fail to operate
properly please proceed the following before calling for service.
PROBLEM
POSSIBLE CAUSE
ACTION TO TAKE
Power switch doesn’t turn on.
AC plug connection failed.
AC socket without power, or power failure.
Turn on the power switch.
Connect the AC plug correctly.
Choose the socket with electric power.
AVR is not on.
LED indicator is not lighted on.
Overload connection.
Reduce the connect loads.
The power is cut-off when you are
using or non-existence or autorestarted.
(A) Power/Reset switch
(B) LED indicator
(C) Output socket
(D) RJ11
(E) AC input cable
Package Contents:
Ÿ
AVR
User Manual (CE&RoHS included)
