RP3 Rowing RP3 Dynamic Manual Download Page 10

 

 
 

 

10 / 19

 

9 Parts list. 

 
The RP3 rowing simulator consists of the following sub- assemblies: 

 

1. 

Main frame  

2. 

Main bar 

3.  

Front leg 

4. 

Rear leg 

5. 

Seat 

6. 

Foot stretchers 

 

 
 

Subject to change without notice. 

 

 

 

WARRANTY.

 

 

Your RP3 rowing simulator is warranted against all defects in materials and 
workmanship for a period of two years after shipment. 

 

Normal wear and tear, and damage due to poor maintenance, is excluded from this 
warranty. 

 

If parts are found defective, contact your nearest RP3 agent, or our office directly: 

Telephone:  +(31) 053 5727923,  
email: 

[email protected]

website: ww.rp3rowing.com 

 
To be considered for warranty replacement or repair, the defective parts must be 

returned, postage paid, to RP3 rowing BV, together with a description of how the 

piece failed and the serial number of the machine   

The customer is responsible for all shipping costs. 
 

The foregoing obligation is RP3 Rowing BV's sole liability under this warranty, 

express or implied, and excludes any liability for consequential damages. 

 
 

 

Summary of Contents for RP3 Dynamic




















Reviews: