Insert Screws (H) into
holes at top and bottom
of both sides of Upright.
If the unit is going to
be sitting alone,
affix
End Panels (E) to each
of the Uprights (B).
Bottom of Uprights
Top of Uprights
Insert open ends of the Wire Grids
G (2) (G) into the channels on the
second Upright (B) as shown.
Next, fasten with Screws (K) as
previously described.
B
B
G (2)
ASSEMBLING FRAME:
2.
MODULAR MERCHANDISING ASSEMBLY: “T” UNIT
If the unit will be connected to another “T” unit
, slide the two units together,
and connect as shown using the bottom and top connector pieces
B
E
