5
Using for the first time
AC power
Power voltage
Important!
After unpacking,please check the goods damage or not,which due to the transportation. If
you find damage, please do not use this item, then contact the dealer or manufacturer as soon as possible.
•Please read the “Safety Information”before using the fixture.
• Check that the local AC mains power source is within the fixture’s power voltage and frequency ranges.
•Please make sure the fixture use in “Safety Information” term.
Warning! Read “Safety Information” starting on page 5 before connecting the BSW350 to AC mains
power.
Warning! For protection from electric shock, the BSW350 must be grounded (earthed). The power
distribution circuit must be equipped with a fuse or circuit breaker and ground-fault (earth-fault)
protection.
Warning! Socket outlets or external power switches used to supply the BSW350 with power must be
located near the fixture and easily accessible so that the fixtures can easily be disconnected from
power.
Important! Do not insert or remove live Neutrik PowerCon connectors to apply or cut power, as this
may cause arcing at the terminals and damage the connectors.
Important! Do not use an external dimming system to supply power to the BSW350 as this may
cause damage to the fixture that is not covered by the product warranty.
Warning! Check that the voltage range specified on the fixture’s serial number label matches the local AC mains
power voltage before applying power to the fixture.
BSW350 fixtures accept AC mains power at 100-240 V nominal, 50/60 Hz. Do not apply AC mains power to the
fixture at any other voltage than that specified on the fixture’s serial number label.