Royalty Line DBC-2200.864.2, Instruction Manual

Page: 13 / 47

Fill with water through Water Filling Inlet un�l the water reach the “MAX”
mark indicated on the side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instruc�ons on the garment label. If there is no instruc�on
but you do know the kind of fabric, please consult the following table.
Note: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fabrics.
Fabric
Synthe�c, Silk, velvet
wool
Co�on, linen
Temperature
control
Temperautre
requirement
Low temperature
Medium temperature
High temperature
Steam
No steam
No steam
Medium, Strong
•
• •
• • •
STEAM IRONING
Place the iron in a ver�cal posi�on and set the temperature control dial at the
minimum/low heat se�ng. Insert the plug into the socket, and then turn the
temperature control dial to the “Co�on / Linen” marking. The pilot light will
come on, indica�ng that the iron is hea�ng up. When the pilot light turns off,
the set temperature has been reached and the iron is ready to use.
During ironing, the pilot light on the iron automa�cally switches on/off as the
thermostat maintains the set temperature (you may con�nue ironing during
this process). Turn the steam control turning knob to the required posi�on.
Steam is produced as soon as the iron in held horizontally.
SPRAYING
Press the spray bu�on to spray water on clothes, as o�en as required.
Note:
When using the water spray func�on, ensure that there is enough water
in the water tank, and you may have to pump the spray bu�on several �mes
at first �me you use the iron in order to start the spraying func�on.
BURST OR VERTICAL STEAM IRONING
Make sure when doing ver�cal ironing that there is plenty of space around the
item of clothing which is to be ironed. You may only perform ver�cal ironing if
the item of clothing is hanging on a hanger and cannot come into contact with
other garments, objects, people or animals.