RoyalTek Sapphire RGM-2000, User Manual

Page: 16 / 45

Step 3:Place your Sapphire on the outside roof of your vehicle with magnetic base.
Step 4:Power on your Notebook PC or Handheld PC.
Step 5:Choose the correct COM port for running the map or navigation software.
Step 6:Run the Sapphire test program. Please refer to “ How to test your Sapphire ”.
Notice:
(1) Make sure the power is off before started.
(2) For safety reason, please do not install Sapphire while driving.
(3) To receive NMEA0183 navigational data, please use the Hyper Terminal program
of Windows Me

. Please setup the COM port connected with Sapphire to:
Baud rate : 4800
Data bit : 8
Parity : None
Stop bit : 1
Flow control : None.
(4) NMEA 0183 data formats are illustrated on Software Data section.
(5) To prevent the poor contact, the 4-pin mini din connector was designed as good
fitting. We strongly recommend user that do not plug and draw this connector
frequently.