RoyalTek RTG-1001 Quick Manual Download Page 3

Page: 3 / 6

English

Getting Started
STEP 1: Charge the Battery

Before you use RTG-1001, the battery must be charged for at least four hours.

Plug car charger into power jack and cigar-lighter separately. As RTG-1001 is

in charging, the Yellow LED will be lighted up. When the battery is fully

charged, the Yellow LED will be turned off. Unplug car charger from power

jack and cigar-lighter separately.

STEP 2: Turn on Receiver and wait for GPS fix

If the position has not been fixed yet, the Green LED will be still. If the position

has been fixed, the Green LED will be blinking.

STEP 3: Connect to Bluetooth-enabled handheld device

From your Bluetooth-enabled handheld device, execute Bluetooth application

software to search RTG-1001 and then connect it to your device. If the

connection between your device and RTG-1001 is successful, the Blue LED

will be blinking.

New Connect

Explore a Bluetooth

device

Tap Bluetooth GPS

BlueGPSxxxxxx

Select Serial Port

Summary of Contents for RTG-1001

Page 1: ...ceiver RTG 1001 please check if your package includes the following items If any item is damaged or missing please contact your reseller at once RTG 1001 External TMC Antenna Car Charger Car Holder PDA Adapter Connector Navigation Software Kit Non Slip Pad Power Switch Power Jack External Antenna Port Right View Power Jack External GPS Antenna Port Power Switch ...

Page 2: ... LED indicates power is in charging 2 Blinking red LED indicates low power 3 Blinking Green LED indicates position is fixed 4 Blinking Blue LED indicates Bluetooth is connected Battery Status GPS Status Bluetooth Status 1 2 3 4 External TMC Antenna Port ...

Page 5: ...ndshield and windows will affect GPS and TMC performance 3 The RDS TMC antenna shall be positioned under the front windshield 4 For the first position fix please make sure your RTG 1001 is not in motion but stationary and in open space so as to shorten the fix time ...