Battery Level Indicator
These indicator lights notify you of
the charging condition of your battery.
When the battery voltage is high green
lights are lit, which indicates a normal
operating condition. When the voltage
drops the yellow lights come on notifying
you that the voltage is low. You should
try to run up the idle if in park or shut off
rear features to bring the battery voltage
up to green. The red lights indicate that voltage is
low, stalling may occur if this condition continues,
the driver should increase the idle if possible or shut
off rear features. If the driver does not act then the
rear cabin air conditioning fans will be shut down
automatically until the system returns to normal
levels.
Master Switch
This switch controls the power to the entire
system. Press this switch to activate power
to the controls and rear features including
TV, Stereo, Lighting and Air Conditioning.
Intercom On/Off
This button turns on the front-to-rear hands
free intercom. Pressing the button will
activate the intercom and will illuminate
the green indicator light. With the light on speak
freely toward the button to communicate with the
rear passengers. Press the button again to shut off the
two-way intercom.
Sun Roof On/Off
This button controls power to rear cabin
sunroof so the rear passenger will not be
able to open or close the sunroof. Press to activate
the sunroof, the indicator light will show green. Press
to deactivate or turn off the sunroof and indicator
light will be off.
Stereo On/Off
This button controls the power to the rear
stereo so the rear passenger will not be
able to use the rear stereo system. Press
to activate rear stereo system and the indicator light
will show green. Press again to deactivate the rear
stereo system and the indicator light will be off.
Divider On/Off
This button controls power to the dividers
so the rear passengers will not be able to
control the dividers. Press to activate the
divider system and the green light indicates divider
power is active. Press again to deactivate turn off the
dividers and the indicator light will be off.
Color On/Off
This button controls the color effects of
the accent lighting system. Press this
button to change the color effects, there
are multiple effects depending upon the initial set
up of the system. Refer to page 18 of this manual
“Operating the LED Fiber Illuminator” to change
your systems setup.
Control Panel Users Guide - Driver
(Standard Equipment)
4
Driver’s Control Panel
