Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
2 / 4
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for
domestic use
only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Keep hands and fingers away from the folding mechanisms to
prevent possible injury.
Once adjusted to the desired position ensure both safety locks are
locked into place.
Dos
Check all screws and bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground.
Always unlock the safety locks before folding the chair.
During bad weather and in winter months the product should be
stored in a cool, dry place. Before storage ensure that it is clean
and dry.
Frames are manufactured using powder coated steel tubing.
When steel is exposed to the air and moisture it will rust. Any
scratches on the paintwork should be touched up immediately
with metal paint to prevent corrosion.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Don’ts
Never tilt the chair during use.
Do not climb or stand on any part of this product or allow children
to play on or around.
This product is intended for a maximum weight of 150kg. Do not
exceed this weight.
Please ensure that the product is fully opened and the legs are
securely in place before use.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Do not use this product as a ladder as this could lead to the
product becoming unbalanced and overturning.
Never drag furniture when moving it, always lift it.
Number of people required
for assembly
One person
Time to assemble
5 minutes
Note: This is a pre-assembled product, no need of
any assembly. But it requires the user to unfold the
chair before use.
Tools required
No need
www.royalcraft.co.uk
Zero Gravity Relaxer Chair
Assembly Instructions
