Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
2 / 6
www.royalcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
This product should only be used on firm, level ground.
Do not stand or climb onto this product.
This product is intended for
domestic use
only.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Dos
When you are ready to start, make sure that you have plenty of
space and a clean, dry area for assembly.
Remove all packaging and banding and place the components
carefully on suitable surfaces to prevent damaging or scratching
them.
Check the pack and make sure you have all parts listed.
We recommend the use of furniture covers to protect your product
when not in use.
This product is suitable for outdoor use in sunny days. Cushions
should not be left out in wet weather or overnight.
To prolong the life of the product we recommend that during
severely bad weather and during the winter months, it is stored in
a cool, dry place.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners
or any other substances containing abrasives since these substances
can damage the product.
Never use the cushion box as a
bench.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Children are not allowed to use this
Cushion Box alone unless there is
adult at present.
Number of people required for assembly
Two people
Time to assemble
50 Minutes
Tools required
Tips:
Do NOT fully tighten bolts before
all components are connected.
Only fully tighten once you are
satisfied with the alignment of all
components.
Do not overtighten the bolts.
Wentworth
Cushion
Storage
Box
Assembly Instructions