Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd.
2 / 4
www.royalcraft.co.uk
Paris Sun Lounging Set
Assembly Instructions
Before you start
Dos
Don’ts
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
This product is intended for
domestic use
only.
Ensure the
product
is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
Store all cushions indoors after use as they are not waterproof
.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve the synthetic rattan, please use a protective cover
when your furniture is not in use. We would also recommend using
a gazebo or parasol over your furniture during the summer period
and prolonged sunny spells. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
Cushions should be cleaned following the care instruction on
the label.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Two p
e
ople
Time to assemble
5
Minutes
Tools required
No tools are required
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
To preserve the table top design do not place greasy / oily items
directly onto the surface. Use place-mats to prevent spillages of
food or drink.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the table as a chopping surface.
Do not strike the table with hard or pointed items.
Do not sit or lean on the table.
Do not sit or lean onto the arms of this product.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product and do not use it as a ladder, as
this could lead to it unbalancing and overturning.
Never tilt the chairs during use.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
