Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd.
2 / 6
www.royalcraft.co.uk
Before you start
Wentworth
Adjustable Table
100 x 100cm
Assembly Instructions
Warnings
Dos
Don’ts
Two people
Time to assemble
50 Minutes
Tools required
Tips:
It is best not to fully tighten the nuts and
bolts until they are all correctly located.
Only carefully tighten them when you are
satisfied with the alignment of all
components.
Be careful not to overtighten.
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for
domestic use
only.
Ensure the table is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on this product.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
In
the event of problems or missing parts, please contact the seller.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use, but we recommend
that a furniture cover be used to add additional protection to your
product when not in use.
During
server
weather
conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures,
the product
should be stored in
side in
a cool, dry place.
During prolonged sunny spells, we recommend that furniture should
be covered over with a protective furniture cover and/or stored
inside when not in use. This will help prevent harmful UV rays from
damaging and discolouring the material.
To best preserve the material (synthetic rattan) we recommend the
use of a UV protector spray like Fabsil. This will block the harmful
UV rays from damaging the material.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary; do not use
washing
powders or any other substances containing abrasives since these
substances scratch glass.