Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd.
2 / 4
www.royalcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE
REFERENCE
READ CAREFULLY
See enclosed instructions for safety and care
information.
Failure to follow the warnings could result in serious
injury.
Handle heavy parts with care.
This product is intended for
Domestic Use
only.
This product should only be used on firm, level
ground.
Ensure the product is always placed on level
ground.
Furniture can be dangerous if used incorrectly or
maintained poorly. Keep your furniture in a good
condition at all times. No liability will be accepted for
damage or injury caused by failure to follow the care
and maintenance guidelines.
Dos
Unwrap all packaging materials and place the
components on suitable surface to prevent
scratching your product.
We recommend the use of furniture covers to protect
your product when not in use.
Cushions should be cleaned following the care
instruction on the label.
If the set is stored outside then we recommend that
cushions are brought inside for storage and
protection.
Torrential rain! No problem, just shake it dry. Red
Wine, Drinks & Sauce spillages! It’s no problem, just
wipe it off.
To clean the product, a pressure washer or jet wash on
a wide spray can be used at a minimum distance of 1m
from the product. Do not aim this directly at the joints of
the furniture. Alternatively it can simply be wiped down
by hand with a damp sponge and a weak solution of
soap and water.
The feet on our all-weather wicker products are made
from recycled PE materials. We would however still
recommend lifting the products to move the items
instead of dragging them which may cause some
damage to either the product or the area in which you
choose to use them.
Don’ts
Never drag furniture when moving it, always lift it.
Never tilt the chair or sofa during use.
Do not stand or climb onto the product.
Do not sit or lean onto the arms/rims of this product.
Never use scourers, abrasives or chemical cleaner.
Lisbon
Sun Lounging Set
Assembly Instructions
