Royalcraft Deluxe Square Cube Table Assembly Instructions Manual Download Page 2

Deluxe Square Cube Table 

Assembly Instructions 

Produced in China for A Mir & Co., Ltd. 

© A Mir & Co., Ltd.

 

2 / 6 

www.a-mir.co.uk

Before you start

Warnings 

IMPORTANT, RETAIN FOR FUTURE 
REFERENCE 
READ CAREFULLY 

See enclosed instructions for assembly, safety and care 
information. 

Failure to follow the warnings could result in serious injury. 

Handle heavy parts with care. 

Ensure  that  this  product  is  fully  assembled  as  illustrated  before 
use. 

This product should only be used on firm, level ground. 

Keep small parts out of reach of children. 

Do not stand or climb onto this product. 

This product is intended for 

Domestic Use

 only.

Furniture can be dangerous if incorrectly used. No liability will be 
accepted  for  damage  or  injury  caused  by  incorrect  use  of  this 
product. 

Dos 

When you are ready to start, make sure that you have the right 
tools, plenty of space and a clean, dry area for assembly. 

Removing all packaging and banding and place the components 
carefully on suitable surfaces to prevent damaging or scratching 
them.   

Check the pack and make sure you have all parts listed. 

Check all screws and bolts are tightened and inspect regularly. 

We recommend the use of furniture covers to protect your product 
when not in use. 

This product is suitable for all year outdoor use. 

However to prolong its life we recommend that during severely 
bad weather and during the winter months, it is stored in a cool, 
dry place.   
Before storage, ensure that the product is clean and dry. 

To  clean,  wipe  down  with  a  sponge  and  warm  soapy  water  and 
wipe with a clean, dry cloth. 

Don’ts 

Do not use scourers, abrasives, washing powders, chemical cleaners 
or any other substances containing abrasives since these substances 
can damage the product, including the glass panel. 

Do not place very hot or very cold items on the glass surface 
unless adequately thick table-mats are used to prevent such 
items from coming into contact with the glass. 

Do not use the glass as a chopping surface. Do not strike glass 
with hard or pointed items. 

Do not strike the glass with hard or pointed items. 

Do not use power tools to construct this product. 

Do not use this product if parts are missing, damaged or worn. 

Do not sit or lean on this product. 

Do not stand or climb onto the product and do not use it as a ladder, 
as this could lead to it unbalancing and overturning. 

Never drag furniture when moving it, always lift it. 

Number of people required for assembly 

Two people 

Time to assemble 

30 Minutes

 

Tools required 

Tips:   
Do NOT fully tighten bolts before 
all components are connected. 
Only fully tighten once you are 
satisfied with the alignment of all 
components. 
Do not over-tighten the bolts. 

Summary of Contents for Deluxe Square Cube Table







Reviews: