Royalcraft ASCOT 1, Assembly Instructions Manual, Page: 3 / 29

R
Parts and Parts List:
Before you start, separate and identify all the parts and hardware to be sure that you have all
the necessary parts for your building (refer to the Parts List Page).
Do not attempt to assemble the building if parts are missing because any building left
partially assembled may be seriously damaged by light winds.
Personal Tools you will N eed:
( Please tear off the safety protection layer before the assembly, keep the part number
label if needed )
Safety must be put in the No. 1 position:
1. Select a dry and calm day for your assembly.
2. Team works (2 or more people) are required during the assembly. It is also
recommended to finish the assembly in a day to avoid damage to the product or missing
of some small parts.
3. Wearing safety gloves, eye protection and long sleeves during the assembly to prevent
injury. Pay attention to the sharp edge of some parts.
4. Children and pets are not allowed entering into the construction site.
5. Never concentrate your total weight on the roof of the building.
When using a step ladder make sure that it is safe.
Care & Maintenance:
1. Keep the shed clean with soft cloth, use water if necessary.
2. Keep the door tracks clear of dirt and other stuff that prevent them from sliding easily.
3. Clean the snow with necessary tools to make sure it is safe to enter into.
4. The shed is not made for living but storing stuff.
5. Please add some oil on the top and bottom door sliding channel to make door slides
smoothly.
www.royalcraft.co.uk
ASCOT 1 3 / 29