![background image](http://html1.mh-extra.com/html/royal/wh-1092/wh-1092_installation-and-instruction-manual_1494147023.webp)
ENGLISH
23
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
od
. ...
.....
..
Pro
d. N
o. .
.....
.....
Se
r. N
o. .
.....
...
P0042 BD
P1035UK
Water is not
visible in the machine. The machine,
which is the result of modern technology, runs
in a very economical way with low water
consumption. Performance is
nevertheless excellent.
Problem
Possible cause
• Spinning starts late or the
laundry is not spun enough:
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 6 minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed or wil not
spin. If at the end of the programme the laundry is
not spun enough, redistribute the load manually
and select the spin programme.
The machine makes an unusual
noise. The machine is fitted with a commutator
motor which improves machine
performance.
P1034UK
• The door will not open:
• The water level is above the bottom edge of the door.
• The machine is heating the water.
• The drum is turning.
The door can only be opened when the relevant
light has gone out.
132996611.qxd 2/28/02 2:42 PM Pagina 23 (Nero/Process Black pellicola)