23
5 After use
GB
5.4
Fitting the filters
1.
Put the foam plastic motor protection filter
back into the permanent filter as shown
(Fig. 14).
2.
Now insert the permanent filter back into
the dust container (Fig. 15).
3.
Put the dust container and motor unit back
together,
Z
Chapter 5.5, "Assembling the
appliance"
.
5.5
Assembling the appliance
1.
Fit the dust container in such a way
(Fig. 16) that both grooves in the bottom of
the dust container engage in both the tabs
on the bottom side of the motor unit
(Fig. 17/A).
2.
Then pivot up the dust container, pushing
firmly until you feel and hear the upper
catch (Fig. 17/B) lock into place.
3.
Check that the dust container is fitted se-
curely.
14
15
ATTENTION:
Never operate the appliance without all fil-
ters correctly fitted inside the dust con-
tainer. Otherwise, the motor might be
damaged.
NOTE:
The permanent filter is designed so that it
only fits in the correct position.
16
A
A
B
B
B
A
17
Verso.book Seite 23 Dienstag, 14. Dezember 2010 10:25 10
