Royal TS4240 User Manual Download Page 69

Page: 69 / 144

TS4240 User’s Guide

Ringing up Sales

Ringing up Sales

After you have the basics programmed in your cash register, you are ready
to ring up sales. For more information about setting up the basics on your
cash register, see Setting Up Your Cash Register - the Basics on page 21.

Reminder

Do not press the

Decimal Point

key when ringing up a price.

Ringing up Sales without a PLU Number

You can ring up a sale for an item that does not have a PLU number. You
must select a department if you are ringing up an item this way.

To ring up a straight cash sale without a PLU number

Put the REG key in the Mode key slot and turn it to the Reg position.

If the clerk numbers are set, press the four digit passcode and then press
the

Clerk

key.

Using the Number keys, enter the price of the first item.

Press the

Department

key for that item.

In Restaurant mode, to use the Department keys from 6 to 35, do the
following:

• Press the

Dept Shift

key and press the department number you want to

use.

In Retail mode, to use department numbers from 9 to 38, do the
following:

• Press the

Dept Shift

key and press the department number you want to

use.

You can also manually enter the Department number in either mode by
entering the Department number and then pressing the

Dept

key.

Repeat for the rest of the items.

When you are done ringing up items, press

subtotal

to see the

transaction detail.

Press the

Amount Tender

key to complete the sale. The cash drawer

opens and the receipt prints.

Make any change needed and place the money you are given in the cash
drawer. Close the cash drawer.

Give the customer the receipt, if the cash register is set to print receipts.

You are ready to ring up another sale.

Summary of Contents for TS4240

















































































































































Search results

Summary of Contents for TS4240

Reviews:

Royal TS4240, User Manual, Page: 69 / 144

Search results

Summary of Contents for TS4240

Reviews: