Royal MB-30, User Manual

Page: 5 / 12

3
ROYAL Cash Drawer MB-30
Key lock operation
The cash drawer has been pre-assembled to make the installation as simple as
possible. Connect the drawer to the POS printer. Whenever the POS application
software sends a drawer open command to the POS printer, the printer will output a
12 to 24-volt electronic pulse to open the drawer.
The cash drawer has a three-position key lock (Figure1) and the fully counter
clockwise lock position offers maximum security.
INSTALLATION
1. Remove the cash drawer from the packing, then remove the keys and
interface cable from the plastic bag.
2. Connect the interface cable to the POS printer.
3. Insert the bill dispenser divider and bill clipper to the cash tray.
• The cash drawer cannot be opened by a printer signal or an individual when
the lock is in the full clockwise position.
• With the lock in the center position, the drawer will open when an electronic
pulse is received from the POS printer.
• The cash drawer is manually opened when the lock is in the counter
clockwise position.
Closed
Figure 1
Automatic open Manual open
You can connect your cash drawer directly to a POS or to a computer. You can use an
RJ11 or USB interface, thanks to the USB trigger (please read more about the USB
trigger at the end of this manual).
The cash drawer can be opened manually by using the hidden emergency lever
underneath the register, towards the back of the cash box. This hidden emergency
lever will not work when the lock is in the close position (see Figure 1 above).
WARNING : The cash drawer cannot be opened when it is locked using the cash
drawer key. Do NOT lose these keys.