Page
13
5.3 Connecting your GPS System to your PC
Be sure your GPS system is turned off and connected to the AC adapter
which was supplied with your system. Connect the USB cable supplied
with your GPS system to the connector opening located on the bottom
of your GPS system as shown in Figure 6.1. Connect the other end of
the USB cable to an available USB port on your computer as shown in
Figure 6.2. Turn on the GPS system by pressing the
ON/OFF
Button.
After turning on your GPS system, the
FIND NEW HARDWARE
wizard
will be displayed on your screen. Select the option that says
AUTOMATICALLY INSTALL DRIVERS
and follow the on-screen
instructions. After completing those instructions, a
SET UP
PARTNERSHIP
window will be displayed. As a default,
YES
will be
selected. Click on
Next
and follow the on-screen instructions.
Summary of Contents for AmeriGo
