Remote Control Operation
•
When the remote control is used for the first time, take out the insulation sheet from the back.
•
The scope of application of the remote control is within 16.4 ft. (5 m) from the receiver. If the remote
control does not face the receiver, its scope of application will be narrowed.
•
The remote control must face the receiver (the receiver is located in the product panel).
•
There shall be no barrier between the receiver and remote control.
•
The remote control may be out of order if it is used in a room with high frequency machines (due to
electromagnetic interference, the sensitivity of the remote control will be reduced).
•
Please use the remote control properly. Do not misuse it or drop it.
PRODUCT OPERATION
This unit can be operated by the control panel or by the remote control.
The fan has three modes and three types of wind speeds, as well as, oscillation and timing functions.
•
On/Off: After the power supply is connected, press the “On/Off” button to turn on the unit. The wind type and
wind speed indicators will light up. The fan will start at a medium speed and then immediately switch to a low
speed. Press this button again to stop the fan and turn off the unit.
•
Wind Speed: Press the “Speed” button to select the desired wind speed. Select between Low, Middle, and
High levels.
•
Wind Type: Press the “Mode” button to select the type of wind. Select between, Normal, Natural, and Sleep.
•
Normal: 5VGCF[WPKHQTODTGG\G
•
Natural: Imitating the natural wind, blowing at different speeds
•
Sleep: Provide wind/breeze that is less powerful and is quieter
•
Oscillation: Press the “Swing” button for the fan to oscillate. The swing indicator light will be turned on while
the unit is oscillating. Press again to stop oscillation.
•
Timer: Use the “Timer” button to set the duration of operation. Continuously press this button to set the timer
between 0.5hr. to 7.5hr.. The indicator lights highlighted will be 0.5hr., 1hr., 2hr., and 4hr., and these may be
added together to show a cumulative total. The tower fan will stop operating when the set time has elapsed.
6
