Note: While replacing parts:
a. Make sure the power plug is unplugged from the power outlet.
b. Open both side covers and rear cover.
3.1 Replacing the Right Cover.
a. Take out the pressure lever (Figure 1) and four cover screws using Phillips screw driver (Figure 2).
b. Pull out the male control panel connector from the Sub-PCB( Figure 3).
c. Loosen two screws from Sub-PCB , installed on to new Right Cover (Figure 4).
d. Follow the reverse order to assemble the Right Cover back.
3.2 Replacing the Left Cover
a. Replace the Left Cover by loosening four Left Cover screws.
3. Replacing Parts
10
Figure 1
Figure 2
Figure 3
Figure 4