NOTE : Before replacing any parts, ensure that the machine is turned off and
3.1 Right Cover
1. Using Philips Screw Driver, loosen the screw on the Pressure Lever. Figure 1
2. Take out the four screws as shown in Figure 2.
3. Disconnect the temperature sensor (RSC-1650H / HR only) and control wires
from the Sub-PCB. Figure 3
3. Replacing Parts
unplugged from the outlet.
Figure 1
Figure 2
Figure 3
1
Summary of Contents for RSC-165C
Page 19: ...CHANGING REMARK No Part No Part Name Spec Qt y 5...
Page 41: ...8...
