Royal Sovereign RSC-1401LS, Owner'S Manual, Page: 8 / 16

8
7. ROLLER NIP SETTING
25
m
m
1 in
1m
m
0.04 in
La
m
in
at
in
g
5 -
7m
m
0.2-0.28 in
O
pe
n
20 - 2
3mm 0.8-0.9 in
15-18mm
0.6-0.7 in
10-1
3mm
0.4-0.5 in
It is important to adjust the roller nip settings to the appropriate thickness of the board
being used. Use the guide below to adjust to the correct position.
8. USING FOOT PEDAL AND REMOTE CONTROL
USING FOOT PEDAL
USING REMOTE CONTROL
Place the foot pedal on the floor in front of the
machine. Once all correct settings are displayed, you
may use the foot pedal to operate the laminator for
“Hands Free Operation.” To activate the machine,
press the foot pedal once and then release. Repeat to
stop the rollers.
Located on the rear left side of the laminator.
1.
PRESS REV – To reverse the rollers. Press and
hold the button (useful for jams or misted media).
2.
PRESS STOP – To stop the rollers from turning.
3.
PRESS FWD
– To activate the rollers.
If you don't want to laminate,
please place the pressure leverto the
"Open position(NO.7)".
1
2
3
4
5
6
7
NO Inches
Metric
(mm)
1 Lamination Lamination
2 1/25 ˝ 1
3 3/6 ˝ ~1/4 ˝ 5~7
4 3/8 ˝ ~1/2 ˝ 10~13
5 3/5 ˝~ 18/25 ˝ 15~18
6 4/5 ˝ ~3/25 ˝ 20~23
7 1 ˝ 25
2
1
3