1) Press the power switch to 'ON' position. The power indicator will light.
2) Place an item to be laminated into the laminating pouch.
(Caution! Photo lamination can produce some bubbles.)
3) Insert the laminating pouch into a carrier.
(Caution! Be sure to use a carrier.)
4) Insert the Carrier, with the stitched edge first, into the front opening of your laminator.
Be sure to center the carrier as it is inserted.
5) A finished laminated item will automatically feed out through the rear of the laminator.
(SAFETY NOTE : The laminated item and the carrier may be too hot to touch.)
6) If the finished laminated item is not completely laminated, retry from 3rd to 5th step.
※
Your finished laminated item will be hot, and will easily bend.
To keep your laminated item flat, place on flat surface and allow to cool.
1. To prevent the possibility of electrical shock, do not immerse machine in water
or permit liquids to get inside.
2. Turn Off the power when unattended or not in use. Unplug your machine before moving or
when it is not in use for an extended period of time.
OPERATING INSTRUCTION
Maintenance
Allow approximately 3 to 4 minutes to preheat. When the proper
temperature is reached, the 'Ready Light' will go on.
4
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500