Royal Sovereign RBW-1500 Owner'S Manual Download Page 16

16

11. WARRANTY

Royal Sovereign International warrants the equipment sold is free from defects in material and workmanship for a period of One (1) 

year for Parts and Labor from the date of installation. This warranty is valid only to the original purchaser. This warranty is the only 

warranty made by Royal Sovereign International and cannot be modified or amended. Royal Sovereign’s sole and exclusive liability 

and the customer’s sole and exclusive remedy under this warranty shall be, at Royal Sovereign’s option, to repair or replace any 

such defective part or product. These remedies are only available if Royal Sovereign’s examination of the product discloses to 

Royal Sovereign’s satisfaction that such defects actually exist and were not caused by misuse, neglect, attempt to repair, 

unauthorized alternation or modification, incorrect line voltage, fire, accident, flood or other hazard. All warranty claims must be 

filed through Royal Sovereign or the authorized Royal Sovereign dealer or reseller through which the equipment was originally 

purchased. Model, serial number and date of delivery are required for all claims.
The obligation to this warranty shall not extend to the following. The adjustment or replacement which are the normal responsibility 

of the owner. Example Welding Belts, loosened fasteners (bolts, screws etc.) Chipped paint or other items such as fuses that show 

wear under normal use. Normal operating adjustments to heat, speed or tension. Parts that are not manufactured by Royal 

Sovereign International Inc.
The warranty made herein is in lieu of all other warranties, expressed or implied, including any warranty or merchantability or 

fitness for a particular purpose. Royal Sovereign will not be liable for personal damage or personal injury (unless primarily caused 

by its negligence), loss of profit, or other incidental or consequential damages arising out of the use or inability to use this 

equipment.

MyBinding.com

5500 NE Moore Court 

Hillsboro, OR 97124 

Toll Free: 1-800-944-4573 

Local: 503-640-5920

Summary of Contents for RBW-1500

















Reviews: