8
oPeRAtIon
Adjustable Bill Guide
The bill counter is preset for Canadian currency. Over extensive use, however, minor adjustment of the Bill Guide may become
necessary.
If: 1. The bills are deformed
2. The machine is considerably slow
3. Error message is lit frequently
The hopper tension may be to tight. To loosen this tension, please turn the Bill Thickness Adjuster one notch to the left (-).
Place the bills back into the hopper to test the machine again. If errors occur, adjust as necessary.
If: 1. The bills are flying out
2. The display shows a miscount
3. Error message is lit frequently
The hopper tension may be to loose. To tighten this tension, please turn the Bill Thickness Adjuster one notch to the right (-).
Place he bills back into the hopper to test the machine again. If errors occur, adjust as necessary.
When the machine is running without any errors, it is ready to accept your currency.
IMPoRtAnt note
: IN CASE OF MONEY JAM DO NOT REMOVE THE BILL BY TRYING TO PULL IT OUT. YOU MAY RIP THE BILL AND ALSO
DAMAGE THE UNIT. REMOVE THE BILL BY MOVING THE RUBBER FOOT WHEEL UP AND DOWN
Move the rubber-foot wheel up and down to remove a jammed bill.
DO NOT trying pulling it out of the machine as you may rip the bill and
damage the unit
Summary of Contents for RBC-3200-CA
Page 2: ...Bill counter...
Page 12: ...COMPTEUR DE BILLETS...