TROUBLESHOOTING
6
Symptom
Solutions
Motor does not work
•
Check to make sure the machine is plugged in.
•
Check to make sure the power button is turned on.
Pouches are not
laminating correctly
•
Make sure that the machine is set to the correct hot setting.
The rollers are moving,
but the laminate item is
not (Machine is jammed)
•
Hold the reverse icon until the entire pouch has exited the front of the
machine. You may have to assist in pulling out the pouch through the
front by hand. Try laminating again after 8 seconds.
NOTE:
For all replacements and repairs that need to be made, contact Royal Sovereign Customer Service at +1) 800-397-1025
PRODUCT OPERATION (cont.)
Before laminating important or unique documents, always test a pouch through the laminator
using a similar document.
Hot/Cold Lamination
5.
The document or photo will then automatically feed out through the back of the machine.
NOTE:
Laminated items exiting the machine may be too hot to touch.
6.
If the item is not completely laminated, repeat steps 4-5.
NOTE:
For Hot lamination, laminated items will be hot and will easily bend. To keep the
item flat, place on a flat surface and allow to cool.
7.
If you turn the unit off, the fan will continue to run to cool down the laminator. The fan will
automatically turn off when the unit is cool. This will take approximately 15-20 minutes.
